Heavy Duty Battery Charger

Technical Data : Input voltage 1PH220V/380V Frequency 50/60Hz Input power approx. 4.5/40kva starting voltage 12/24v starting current approx. 1800a charging voltage 10-15/20-30v charging current approx. 100a dimensions (lxwxh) approx.  350x340x820mm Acessories included: battery clamp 2pcs, castor 2pcs, castor axle 1pc cotter pin 2pcs, output cable 2pcs, host 1pc

Fuel Injection Control Board System

Spesifikasi : Injection System Module with Auto Fault – Installment of 2 kinds of injection system (fuel return system, fuel return less system) – Control of fuel pressure regulator and injecting place pressure changes – Measurement: 1.    output waveform and practice injection system wiring 2.    injection state and difference of injection types 3.    injection quantity…

Electrical Storage Oscilloscope

Technical Data : Channels 2 Bandwidth approx. 25MHz Sample Rate approx. 250MS/s Rise Time ≤14ns Memory Depth approx. 25kpts Waveform Acquisition Rate   ≥2000wfms/s Vertical Sensitivity approx. 1mV/div~20V/div Timebase Range 10ns/div~50s/div Storage Setup,Wave,Bitmap Trigger Modes Edge, Pluse, Video, Alternate Interface USB OTG, Pass/Fail General Characteristic Power 100-240VAC, 40-440Hz Display approx. 7 Inches 64K Color TFT  LCD, …

DC Power Supply

Technical Data : Output Voltage 0~32V Output Current 0~5A Load Regulation Voltage ≤0.01%+3mV Current ≤0.2%+3mA Power Regulation Voltage ≤0.01%+3mV Current ≤0.1%+3mA Noise Voltage ≤1mVrms Current ≤3mArms Display Accuracy ≤±1%rdg+2digits Constancy (MTBF)≥2000h Power Supply Input voltage:115VAC/230VA;Frequency:47Hz/63HzGeneral Characteristics Manual Book  

Commonrail Diesel Test Bench

Technical Data Testing pump and testing injector. Motor power: approx. 7.5KW Electronic power: 3 phase 380V or 1 phase 220V Motor speed: 0-4000RPM Presure adjustment: 0-2000bar Flow testing range: 0-600ml/ approx. 1000 times Flow measurement accuracy: approx. 0.1ml Cooling system: fan or forced cooling

Combination Starter And Alternator Training System

Spesifikasi : Composition : Main body stand, 2 second phase of resistive heater, 2 sets of lighting system, 2 sets of resistance-modulating lighting system, power supplier, inverter for controlling speed of volt meter ampere motor, generator, etc. Motor : three phases 380V, approx. 3HP motor – Equipment of transparent polycarbonate in motor drive parts, stand…