Air return style: Full down draft, basement high approx. 300 mm
Front door structure: approx. 3 folded without frame
Safe door: 1 piece in the side wall, min. 2000 X 800 mm
Wall panel meterial: EPS ( Expanded polystyrene) approx. 50mm, wall panel side with metal covered, Steel thickness(mm): approx. 0.426
Top light: approx. 8X4X36W,
Side light: approx. 8X2X36W (Vertical)
Intake fan (KW): approx. 2X3.5KW
Exhaust fan (KW): approx. 1X7.5KW
Total power (KW): Max. 18.5KW
Generator frame:Iron frame with aluminum angle
Heat exchanger: stainless steel made, rear duct
Buner, Exhaust duct: 4M straight ducts, 2pcs of elbows
Filter installed:hingle installed, mounted above support frame
Fan capacity(M3/H): approx. 24000
Motor Voltage: 380V/50HZ/3PHMax drying temperature: 80℃
Manual Book
